(Minimum Order Qty - 165 Bottles)

Content: Ethyl alcohol 70% solution with glycerine and hydrogen peroxide as per WHO Recommended formula

Content: Ethyl alcohol 70% solution with glycerine and hydrogen peroxide as per WHO Recommended formula

Content: Ethyl alcohol 70% solution with glycerine and hydrogen peroxide as per WHO Recommended formula

Disinfectant Skid complete with the following accessories.

- Mounted on Baseframe with Stand/ Trolley (As shown in picture)
- Belt, Pully
- 100m Pipe
- 2 Nos Fogging Nozzles
- Pump for spraying disinfectant

Model - A
- 2.5 HP Pump Set
- GS-80 Petrol Engine with 1.5 Liter Petrol Tank
- Approx Consumption of Petrol - 300 ml/hour
- Approx flow through one nozzle - 2 to 3 lpm
- Approx through of jet - 10 Feet

Model - B
- 5 HP Pump Set
- GS-160 Petrol Engine with 1.5 Liter Petrol Tank
- Approx Consumption of Petrol - 600 ml/hour
- Approx flow through one nozzle - 4 to 6 lpm
- Approx through of jet - 20 Feet

Note: For Moving application, one tank having a minimum 200-liter capacity should be kept along with the skid/trolley.

Chemical Splash goggles Protect eyes against hazardous chemical and dust, made of soft clear vinyl frame with high impact resistant, clear PETvisor and superiror adjustable elastic headband can be worn over personal spectacles comfortably. CLI -PerformanceTest approved as per BIS standard IS : 5983 : 1980.

Made from Asbestos fabric with heavy duty flannel lining pasted with synthetic solution.
It is a one piece overall with Hood, pair of Hand Gloves.
Available in AMC -41

The nozzle shall be designed to provide a constant pressure of 100 PSI over the flow range between 70 – 200 GPM. The nozzle shall be able to allow for Straight Stream to Wide Fog patterns.
The nozzle shall have arrangements to flush without shutting down the flow. The nozzle shall be built from Hard Anodized Aluminium Alloy for excellent corrosion protection.
The nozzle shall have a pistol type grip which should provide excellent grip of the nozzle for fire fighters wearing gloves or using it bare handed. The shall have a Delrin / Non Metallic Ball Valve type mechanism for flow control.
The nozzle shall have a protective bumper at the top along with a Nylon Type teeth ring. The inlet of the nozzle shall be 63 mm British Standard Type Male Inst. Connection and shall have an inlet strainer of Stainless Steel to restrict the debris entering the nozzle flow stream.
The nozzle shall have laser engraved brand name, serial number, model number and QR Code from the OEM. The nozzle shall meet NFPA 1964 Standards and shall be CE certified to EN15182. The weight of the nozzle shall be less than 3 Kgs.

Gun Metal 63mm MI x 19mm Shank Reducer